（4）分别增加TTY在两台主机上：
smit tty
选择：Add a TTY
Add a TTY
Type or select values in entry fields.
Press Enter AFTER making all desired changes.
[TOP] [Entry Fields]
TTY tty2
TTY type tty
TTY interface rs232
Description Asynchronous Terminal
Status Available
Location 01-S4-00-00
Parent adapter sa3
PORT number [0] +
Enable LOGIN disable +
BAUD rate [9600] +
PARITY [none] +
BITS per character [8] +
Number of STOP BITS [1] +
[MORE...35]
在第二台主机上同样方法配置一个TTY。
（5）配置心跳线TTY
Cluster Topology
Configure Cluster
Configure Nodes
Configure Networks
Configure Adapters
Configure Sites
Configure Global Networks
Configure Network Modules
Configure Topology Services and Group Services
Show Cluster Topology
Synchronize Cluster Topology
---------- end of screen ----------
选择Configure Adapters
Configure Adapters
Adapters on IP-based network
Adapters on Non IP-based network
---------- end of screen ----------
选择Adapters on Non IP-based network
Adapters on Non IP-based network
Add an Adapter
Change / Show an Adapter
Remove an Adapter
---------- end of screen ----------
选择Add an Adapter，并进行配置
Add an Adapter
[Entry Fields]
Adapter Label m851_tty
New Adapter Label []
Network Type [rs232] +
* Network Name [test_tty] +
* Device Name [/dev/tty2]
* Node Name [m851] +
---------- end of screen ----------
Add an Adapter
[Entry Fields]
Adapter Label m852_tty
New Adapter Label []
Network Type [rs232] +
* Network Name [test_tty] +
* Device Name [/dev/tty3]
* Node Name [m852] +
---------- end of screen ----------
（6）配置资源组：
smit hacmp:
屏幕显示hacmp菜单：
HACMP
Cluster Configuration
Cluster Services
Cluster System Management
Cluster Recovery Aids
RAS Support
---------- end of screen ----------
选择Cluster Configuration，
Cluster Configuration
Cluster Topology
Cluster Security
Cluster Resources
Cluster Snapshots
Cluster Verification
Cluster Custom Modification
Restore System Default Configuration from Active Configuration
Advanced Performance Tuning Parameters
---------- end of screen ----------
选择Cluster Resources
Cluster Resources
Define Resource Groups
Define Application Servers
Configure Application Monitoring
Define Tape Resources
Define Highly Available Communication Links
Discover Current Volume Group Configuration
Configure Dynamic Node Priority Policies
Change/Show Resources/Attributes for a Resource Group
Cluster Events
Change/Show Run Time Parameters
Change/Show Cluster Lock Manager Resource Allocation
Show Cluster Resources
Synchronize Cluster Resources
---------- end of screen ----------
